|
EPC designs and manufacturers printers, data acquisitions
systems, and print utilities for the geophysical, military and imaging
marketplaces. Visit us today on the World Wide Web: http://www.epclabs.com
In this Issue:
"We have had great success and are very
happy with our 14-year old EPC 1600...Thank you from a long-time
satisfied customer."
Daniel Belknap
Department Geological Sciences
University of Maine
back
to top
Now available is the EPC Info Disk. On one
a single CD, EPC will have the following information:
All Manuals: GSP-1086, GSP-1086 500 Series,
9802, 9502, 9205, ADS-640, ADS-640 Supplement, AUTOCOMM, 9802 Training
Guide
All Product Sheets: GSP-1086, GSP-1086 500 Series,
9802, 9502, 9205, ADS-640, D/A Converter, IPU, WIN 95/NT Developer's
Tool Kit
General Information: Y2K Statements, Paper
Usage Chart, Media P/N, TGR Spares, Consumables, Interfaces, Sales
Representatives, FAQs, Recorder Trees.
Technical Support: Ground Post Installation, Printhead
Upgrade, Technical Bulletins, ADS-640 Video Upgrade.
Test Utilities: AUTOCOMM, Parallel and Serial
Test Programs, Sample Data, ADS-640 Demo.
Image Gallery: Various images including side-scan
sonar, sub-bottom profiling and pictures that can be played back
to EPC Thermal Printers through the Image Processing Utility.
Photo Gallery: Various photos of EPC products
in the field.
The EPC Info Disk is available for US$19.95
An incredible savings considering the volumes of information.
Orders available by Credit Card or mail check to: EPC Laboratories,
Inc., 5 Electronics Ave., Danvers, MA 01923 epc@delphi.com
back
to top
EPC will once again be participating in the Ocean
Technology Workshop (OTW) held at the SeaCrest Oceanfront Resort
& Conference Center (October 5-8, 1999) in Falmouth, Massachusetts.
The event hosted by the Massachusetts Ocean Technology
Network (MOTN) includes hands on training, discussions and presentations
by 15-20 MOTN manufacturers. The week also includes Sea Trials,
New England Clam Bake Dinner, Golf Scramble and a tour of the world
renown Woods Hole Oceanographic Institute.
Companies that offered training in 1997:
|
Benthos
C-MAP
CR Environmental
Datasonics
EdgeTech
Ocean Data Equipment Corporation
|
Falmouth Scientific
Klein Associates
MariNet
Material Systems
McLane Research |
Sippican
Webb Research
Woods Hole Group
Mooring Systems
EPC Labs |
For further details visit the MOTN web-site:
http://www.MOTN.org
back
to top
EPC is pleased to announce recent contracts to
Japan. Through the EPC sales representative TOYO Corporation,
EPC has supplied 2 X Model 9802 (Furuno), 1 X Model 9802 (Japanese
Maritime Safety Agency), 6 X Model GSP-1086-0 Series (JMSA) 1 X
Model GSP-1086-2 500 Series (JMSA), 1 X Model GSP-1086-0 (JAMSTEC),
and 1 X Model GSP-1086-2 500 Series to Daiwa Survey. The total TGRs
supplied to Japan over the two months is twelve!
back
to top
EPC is pleased to announce that Ted Curley has
been named the Vice President of the Massachusetts Ocean Technology
Network (MOTN). MOTN was formed in 1994 as a non-profit corporation
with the express purpose of promoting, supporting and expanding
the marine technology manufacturing and service business in New
England.
There are over 40 Full Members in the group.
Ted Curley will maintain his position as Sales & Marketing Mgr.
at EPC labs, Inc. Other elected officials: President: John
Caughlin, Benthos, Inc.; Directors: Paul Igo: Electronics Sales
of New England (ESNE), Greg MacEchern, EdgeTech; Clerk: Maggie Merrill,
Marine Marketing Services; Treasurer: Mike Stewart, MaCartney.
back
to top
One of the more frequent adjustments needed on
thermal printers is to correct paper skewing. More prevalent
on wide-bed thermal (20" display) than on the GSP-1086 series,
paper will wander or drift to the left or right.
Using a 3/32 right angle hex wrench, open paper
feed chamber and locate the paper support blocks. On the paper
support block there is a 3/32 set screw. Keeping bare hands
away from the printhead, advance the screw upward into where the
end cap of the paper roll would be. This procedure will create
drag on the end cap causing the wandering paper to pull towards
that block and straighten out the record.
back
to top
IGP Pinnow (Hamburg, Germany) represents EPC Labs,
Inc. in Germany and was founded in 1981. Gerold Pinnow has
secured recent orders for STN, Nautik and Hydrographic Office.
The company's activities are in Consulting and Sales and Leasing
in the oceanographic market for underwater instruments and navigation
systems. http://www.igp.de
back
to top
EPC has been contacted by Glen Gilbert, President
of Canadian Seabed Research Ltd. His company is looking for
an EPC Model 3200. Please contact Mr. Gilbert directly if
you have one for sale or know of a location he can find one csr@ns.sympatico.ca
Something to post? If you would like to
post any notice or hot links on used equipment, services, employment
opportunity, EPC will post the information in the Bulletin Board"
section of the EPC Monthly FREE of charge.
The EPC Monthly is a FREE e-mail Newsletter provided
to all EPC customers and industry personnel. If you have received
this e-mail in error or would like to unsubscribe, please reply
and type "UNSUBSCRIBE" in the subject line.
Next issue: April 8, 1999
|
